AbrasiveStore.com

Standard Abrasives

 

BUFF & BLEND FLAP BRUSHES
Mounted Flap Brushes
Standard Abrasives™
Buff & Blend Mounted Flap
Brushes
Mandrel Mounted Flap Brushes are soft and
conformable. The Buff & Blend GP material
allows removing surface contaminants
without eliminating critical detail or gouging
the work piece. Its design utilizes the “face”
• Decorative satin and matte finishing on Stainless Steel, Brass and Aluminum
of the material rather than the “edge,”
• In-line brush finish for Stainless Steel and Aluminum cookware; high luster
resulting in fine finishes without leaving
finishes
“lines” associated with ganged arbor hole
• Removes surface contaminants such as rust, grease and oils
discs. They are waterproof and may be used
• Finishing Aluminum extrusions
with lubricants.
• Load-resistant; no metal contamination of work piece
2” x 2” x 1/4”
3” x 2” x 1/4”
GP
AP
GP
AP
GRADE
GRAIN
PART NO.
PART NO.
PART NO.
PART NO.
Medium
A/O
Color
Maroon
Tan
Maroon
Tan
Rec. R.P.M.
15,000
15,000
12,000
12,000
Min. Pkg.
10
10
5
5
Case Qty.
100
100
50
50
Mini Brushes
Standard Abrasives™
Mini Brushes
Standard Abrasives Mini-Brushes are the fast, easy way to restore
finishes to their original condition.
• Delivers high-quality finish
• Long-lasting
• Easy to control
• Conforms to most surface geometries
• Saves time and labor costs
• Uses a simple repeatable procedure that any operator
can quickly master
SIZE
GRADE
PART NO.
REC. R.P.M.
CASE QTY.
A/O
Medium
3,500
1
4-1/2” x 2” x 5/8-11
HIGH STRENGTH
A/O
Coarse
3,500
1
MINI-BRUSH
A/O
Medium
3,500
2
4-1/2” x 4” x 5/8-11
A/O
Coarse
3,500
2
A/O
Very Fine
3,500
1
4-1/2” x 2” x 5/8-11
A/O
Medium
3,500
1
A/O
Extra Coarse
3,500
1
S/C Medium
3,500
1
MINI-BRUSH
A/O
Very Fine
3,500
1
4-1/2” x 4” x 5/8-11
A/O
Medium
3,500
1
A/O
Extra Coarse
3,500
1
S/C Medium
3,500
1
4-1/2” x 2” x 5/8-11
A/O
60
3,500
2
A/O
100
3,500
2
MINI-BRUSH
A/O
150
3,500
2
INTERLEAF
A/O
60
3,500
1
4-1/2” x 4” x 5/8-11
A/O
100
3,500
1
A/O
150
3,500
1
HS Buff & Blend Flap Brushes are also available in coarse grade in hard and medium densities. Choose from 6", 8", 12" and 14” diameters.
Contact Us for additional size availability.
Buff & Blend Flap Brushes
Standard Abrasives™
Buff & Blend Flap Brushes
Conformable flap brushes allow for controlled wheel action,
maximizing removal of surface contaminants without removing
critical detail or gouging the work piece. They produce a consistent
finish which does not reflect lines commonly attributed with ganged
arbor hole discs. Density, pressure and angle determine the ability of
the Flap Brush to remove burrs,
oxidation and handling marks. The
• Uniform and long line brushes finishes on Aluminum, Brass and Stainless Steel
abrasive material provides ventilation
• Grain finish on brass strike plates for door hardware
which helps dissipate heat and,
therefore, runs cooler. This provides
• Satin finish on builders’ hardware (cabinet handles, door knobs, and more)
consistent finishes without smearing
• Satin finishes on soft metals
or otherwise discoloring the work
• Highlighting and finishing Aluminum extrusions (used as a quality control tool to
piece. Minimal vibration can reduce
identify defects)
chattermarks on the work piece and
• Inline brushed finish on Aluminum and Stainless cookware (pots and pans)
can lead to less operator and machine
• Produce fine scratch pattern on utensils and cutlery prior to cotton buff and
fatigue. Use on the following tools:
compound polishing
Straight Shaft Portable Grinder, Bench
• Remove oxide from precious metals
Motor, Backstand, Floor Lathe, Rotary,
• Blending flash and parting lines on Aluminum die cast
Straight Line, and Robotic.
6” x 1” x 2”
6” x 2” x 2
8” x 1” x 3”
8” x 1-1/2” x 3”
DENSITY
GRADE
COLOR
PART NO.
PART NO.
PART NO.
PART NO.
Very Fine
Maroon
Medium
Medium
Maroon
HS Medium
Blue
Very Fine
Maroon
Medium
Maroon
Hard
HS Very Fine
Maroon
HS Medium
Blue
Rec. R.P.M.
3,400
3,400
3,200
3,200
Min. Pkg.
1
1
1
1
Case Qty.
3
2
3
2
8” x 2” x 3”
12” x 1” x 5”
12” x 1-1/2” x 5”
12” x 2” x 5”
DENSITY
GRADE
COLOR
PART NO.
PART NO.
PART NO.
PART NO.
Very Fine
Maroon
Medium
Maroon
Medium
HS Medium
Blue
Very Fine
Maroon
Medium
Maroon
Hard
HS Very Fine
Maroon
HS Medium
Blue
HS Coarse
Green
Rec. R.P.M.
3,200
2,500
2,500
2,500
Min. Pkg.
1
1
1
1
Case Qty.
2
4
3
25
HS Buff & Blend Flap Brushes are also available in coarse grade in hard and medium densities. Choose from 6", 8", 12" and 14” diameters.
Contact Us for additional size availability. *2 per case.
Flange Adapters for Flap Brushes
PART NO.
USE WITH
MIN. PKG.
6” diameter Flap Brush with 2” center hole
1
8” diameter Flap Brush with 3” center hole
1
12” diameter Flap Brush with 5” center hole
1
14” diameter Flap Brush with 8” center hole
1
These flange adapters are made to order and machined for extra durability. To ensure size
accuracy of flanges, when ordering, please specify Flap Brush outside diameter dimension
and flange arbor hole size.


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.