AbrasiveStore.com

Standard Abrasives

 

SURFACE CONDITIONING BANDS
Standard Abrasives™
Surface Conditioning Bands
Ideal for applying cosmetic grain finish on Aluminum and Stainless Steel.
Reduces surface roughness and uneven edges between adjoining surfaces.
Conditions coated abrasive grind lines.
• Fast rate of cut from unique RC material
• Versatile sizes; use where belts cannot access
• Exhibits high finishing rate while maintaining consistent finish;
reduction in finishing steps
BAND SIZE: INSIDE DIAMETER x WIDTH
GRADE
1/2” x 1/2”
1/2” x 1”
1” x 1”
1-1/2” x 1”
1-1/2” x 1-1/2”
2” x 1”
2” x 2”
MIN. PKG.
CASE QTY.
Coarse
10
100
Medium
10
100
Very Fine
10
100
The maximum allowable R.P.M. for bands is the same as the maximum R.P.M. of the rubber sanding drum used to drive the bands, provided the drum and the
band are the same nominal diameter.
Rubber Drums for Bands
DIA.
FACE
SHANK
MAX. R.P.M.
PART NO.
DIA.
FACE
SHANK
MAX. R.P.M.
PART NO.
1/2”
1/2”
1/8”
30,000
1”
1-1/2”
1/4”
10,000
1/2”
1/2”
1/4”
30,000
1”
2”
1/4”
8,000
1/2”
3/4”
1/4”
25,000
1”
3”
1/4”
6,000
1/2”
1”
1/4”
15,000
1-1/4”
1”
1/4”
14,000
1/2”
1-1/2”
1/4”
12,000
1-1/4”
1-1/2”
1/4”
10,000
3/4”
1/2”
1/8”
20,000
1-1/2”
1”
1/4”
14,000
3/4”
1/2”
1/4”
27,000
1-1/2”
1-1/2”
1/4”
10,000
3/4”
3/4”
1/4”
24,000
1-1/2”
2”
1/4”
7,000
3/4”
1”
1/4”
19,000
2”
1”
1/4”
11,000
• Fabricated from rubber for
3/4”
1-1/2”
1/4”
10,000
2”
1-1/2”
1/4”
8,000
controlled expansion and balance
3/4”
2”
1/4”
9,000
2”
2”
1/4”
6,000
at high speeds
1”
1/2”
1/4”
20,000
3”
1”
3/8”
7,000
• Band locks on non-slip drum
1”
3/4”
1/4”
19,000
3”
2”
3/8”
4,000
1”
1”
1/4”
18,000
3”
3”
3/8”
3,000


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.