AbrasiveStore.com

Standard Abrasives

 

SPIRAL BANDS
Standard Abrasives™
Spiral Bands
Best product for polishing and blending contours when
smooth running is a primary concern. Use for finishing
hard-to-reach areas, removing parting lines,
imperfections, and burrs on all surfaces. Made with
Aluminum Oxide material.
• No tools required for changes
• Single ply of coated abrasive, made in close
tolerance to fit properly on rubber drum
prevents skipping and bumping
INSIDE
24
36
40
50
60
80
100
120
150
180
240
320
DIA.
LENGTH
GRIT
GRIT
GRIT
GRIT
GRIT
GRIT
GRIT
GRIT
GRIT
GRIT
GRIT
GRIT
1/2”
1/2”
1”
1-1/2”
1/2”
3/4”
3/4”
1”
1-1/2”
2”
1”
1”
1-1/2”
2”
1-1/2”
1”
1-1/2”
1”
2”
1-1/2”
2”
Min. Pkg.
100
100
100
100
100
100
100
100
100
100
100
100
Case Qty.
100
100
100
100
100
100
100
100
100
100
100
100
3”
3”
Min. Pkg.
50
50
50
50
50
50
50
Case Qty
.
50
50
50
50
50
50
50
The maximum allowable RPM for Spiral Bands is the same as the maximum RPM of the rubber sanding drum used to drive the bands, provided the drum and the band
are the same nominal diameter.
Rubber Drums for Spiral Bands
DIA.
FACE
SHANK
MAX. R.P.M.
PART NO.
DIA.
FACE
SHANK
MAX. R.P.M.
PART NO.
1/2”
1/2”
1/8”
30,000
1”
1-1/2”
1/4”
10,000
1/2”
1/2”
1/4”
30,000
1”
2”
1/4”
8,000
1/2”
3/4”
1/4”
25,000
1”
3”
1/4”
6,000
1/2”
1”
1/4”
15,000
1-1/4”
1”
1/4”
14,000
1/2”
1-1/2”
1/4”
12,000
1-1/4”
1-1/2”
1/4”
10,000
3/4”
1/2”
1/8”
20,000
1-1/2”
1”
1/4”
14,000
3/4”
1/2”
1/4”
27,000
1-1/2”
1-1/2”
1/4”
10,000
3/4”
3/4”
1/4”
24,000
1-1/2”
2”
1/4”
7,000
3/4”
1”
1/4”
19,000
2”
1”
1/4”
11,000
• Fabricated from rubber for
3/4”
1-1/2”
1/4”
10,000
2”
1-1/2”
1/4”
8,000
controlled expansion and balance
3/4”
2”
1/4”
9,000
2”
2”
1/4”
6,000
at high speeds
1”
1/2”
1/4”
20,000
3”
1”
3/8”
7,000
• Band locks on non-slip drum
1”
3/4”
1/4”
19,000
3”
2”
3/8”
4,000
1”
1”
1/4”
18,000
3”
3”
3/8”
3,000


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.