Monroe Fluid Technology



High-performance biostable oil-free synthetic cutting and grinding fluid

ASTRO-CUT SUPER SYN is a heavy-duty oil-free synthetic cutting and grinding fluid concentrate designed to offer outstanding machining performance in even the most demanding applications, including aluminum and tough aerospace materials.

This clean-running, low-foam product is stable in both soft and extremely hard water and contains additives which provide excellent rejection of tramp oils. In addition, ASTRO-CUT SUPER SYN provides rapid fine settling capabilities. This product contains no secondary amines.

Part No. Quantity
32-050 5 Gallon Pail
ASTRO-CUT SUPER SYN has been designed for machining and grinding most metals, including stainless steels, tool steels and alloys. ASTRO-CUT SUPER SYN is formulated to prevent staining or corrosion on copper, brass, bronze or aluminum. Excellent on cast iron. This product may also be used for grinding: blanchard, diamond wheel, centerless, belt, disk, etc. ASTRO-CUT SUPER SYN should not be used for machining Magnesium. This product may be used in most coolant mist units for machining and grinding operations.

NOTE: Since this product is completely oil-free, it may be used in most coolant mist units for machining and grinding operations.
  • Superior Machining Performance
  • Nitrite-Free
  • Chlorine-Free
  • Phenol-Free
  • Very Low Foam Ð Excellent on High Pressure, High Speed Machining
  • Excellent Corrosion Inhibition
  • Long Tank Life
  • Excellent Cooling Ability to Maintain Close Tolerances
  • Hard Water Stable
  • Rapid and Complete Tramp Oil Rejection
  • Economical Water Extendable Formulation
  • Rapid Chip Settling
  • Appearance - concentrate:
Blue Liquid, Slight Haze
  • Appearance - dilution:
Transparent Blue Liquid
  • Odor:
  • Residual Film:
Soft, Soluble
  • pH @ 20:1:
9.3 ± 0.3
  • Specific Gravity @ 60° F.
1.03 ± 0.01
  • Lbs./Gal.
8.6 ± 0.1
  • Flash Point, PMCC, ° F.
Concentration - ASTRO-CUT SUPER SYN:
  • Concentration:
4% (1:25) 5% (1:20) 7% (1:14) 10% (1:10)
  • Brix Reading:
1.6 2.0 2.8 4.0
An optical refractometer may be used for determining concentration. These numbers are typical and are not to be construed as specifications.
Recommended Starting Dilutions:
  • Milling, Drilling, Turning:
10:1 / 20:1 (5%)
  • Centerless, ID, OD, Surface Grinding:
  • Misting Applications:
25:1 / 40:1 ( 2.5%)
View Monroe Fluid Technology's Website for Product Data Sheet and MSDS
The information presented on this page is for informational purposes only. Please ensure the accuracy of the data from the manufacturer's Product Data Sheet and Material Safety Data Sheets listed above.

Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.