Monroe Fluid Technology



High performance biodegradable cutting and tapping fluid

COOL TOOL is a universal cutting and tapping fluid that performs extremely well on all metals including aluminum, stainless steel, exotic alloys and some plastics. Cool tool does not contain 1,1,1- trichloroethane. COOL TOOL contains no ozone depleting chemicals (ODCS).

Part No. Quantity
02-050 5 Gallon Pail
02-104 1 Gallon Bottle
02-016 1 Pint Bottle
Apply COOL TOOL cutting and tapping fluid directly to the cutting tool using a brush, oil can or other convenient applicator. May be used for drilling, tapping, reaming, milling, turning, boring, broaching, hobbing and blanking of all metals.

Use COOL TOOL as received. No mixing is required.
  • Biodegradable
  • Improved Finish
  • Long Lasting - Does Not Evaporate
  • Excellent Corrosion Inhibition
  • Silicone Free
  • Leaves a Protective Film
  • Clings to the Tool
  • Mild Pleasant Odor
  • Superior Lubricity
  • Operator Friendly
  • Increased Tool Life
  • Applicable to All Metals
  • Non-Staining
  • Can Be Used on Ferrous and Non-Ferrous Materials
COOL TOOL - Biodegradable Cutting and Tapping Fluid Properties:
  • Appearance - concentrate:
Clear Amber Liquid
  • Odor:
  • Residual Film:
Soft, Fluid
  • Specific Gravity @ 60¬∞ F.
1.036 ± 0.01
  • Lbs./Gal.
7.6 + 0.1
  • Flash Point, PMCC, ¬∞ C.
FULL STRENGTH: Apply COOL TOOL directly to the cutting tool using brush, oil can, or other convenient applicator.

NOTE: DO NOT mix COOL TOOL with water.

COOL TOOL is available in a variety of container sizes to meet your application needs including aerosols, pints, gallons, 5 Gallon Pails, 30 and 50 Gallon Drums.
View Monroe Fluid Technology's Website for Product Data Sheet and MSDS
The information presented on this page is for informational purposes only. Please ensure the accuracy of the data from the manufacturer's Product Data Sheet and Material Safety Data Sheets listed above.

Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.