AbrasiveStore.com

Dynabrade: Arbors Mount Abrasive Wheels, Discs, Pneumatic Wheels, etc.

 

Tool Spindle
Part Number
Arbor Thread
Arbor Bore
Wheel Width
3/8"-24 Male
5/8"
Up to 2-1/2"
1"
5/8"
Up to 3"
1"
1/2"-20 Male
14 mm
Up to 51 mm
1/2"
Up to 2"
5/8"
Up to 2"
5/8"
Up to 3"
1"
5/8"
Up to 3"
1"
5/8"-11 Male
3-1/2"
5/8"-11 Male
5/8"
Up to 3"
1"
5/8"
Up to 3"
1"
Arbors
Mount Abrasive Wheels, Discs, Pneumatic Wheels, etc.
Use Dynabrade arbors to mount abrasive
wheels, discs, stars and other
accessories to male spindle tools
For use with many Dynabrade and other manufacturers’
portable tools and bench grinders. Mount abrasive
wheels, discs, pneumatic wheels, sanding stars and
other accessories to 3/8"-24, 1/2"-20 or 5/8"-11 male
spindle tools by using the combination of spacers and
flanges that suits your application.
NOTE: Speed of tool must not exceed maximum operating speed of accessory
Part Number 13074
Arbor Kit
Mounts to 3/8"-24,
1/2"-20 AND 5/8"-11
male spindle sizes;
also accepts any
Dynacushion or
accessory which
has 5/8" bore from
1/2" to 3" wide in
1/2" increments.
Chuck Size
Thread
Chuck Part No.
Key Part No.
5/32"
5/16"-24 Female
1/4"
3/8"-24 Female
3/8"
1/2"-20 Female
3/8"-24 Female
1/2"
1/2"-20 Female
Most Aggressive/Less Flexible
Six stars, one spacer. For heavier stock removal; work on flats, edges,
larger surface
areas, great for
defuzzing
hard woods.
Least Aggressive/Most Flexible
Two stars, up to ten spacers. For light stock removal reaching into
small holes, cut-outs, heavy contours,
tight grooves;
great for defuzzing
soft woods.
Mounting Options for Arbor-Mount
Sanding Stars on 12980 Arbor
The spacing of stars on the arbor, as well as the grit, determine desired
sanding aggressiveness. We suggest that the operator explore various
grit and spacing combinations based on the following guidelines.
Part No. 95722
1/4" diameter with 1/4" shank.
For DynaStrip discs.
Part No. 11399
Type 27 Wheel Mount
For use with larger than
5" (127 mm) dia. Type 27
grinding wheels mounted
on depressed center wheel
grinders.
NOTE: Use only Type 27
reinforced depressed
center wheels.
Part No. 95749
1/2" diameter with 1/4" shank.
For DynaStrip discs.
Disc Mount
Assembly
Part No. 50263
4-1/2"-5" (114-127 mm) Dia. Discs
50264 Mount and 50268 Flange Nut
have 5/8"-11 thread.
Accepts discs with center hole.
1-3/4" (44 mm) diameter mount allows for maximum disc flexibility.
“Universal” Shank Arbor
Handy accessory fits drills and die grinders!
Mount sanding stars, flap wheels, unitized wheels,
non-woven nylon wheels, buffs, etc.
High quality steel arbor; all flanges and spacers included.
Part No. 12995
Arbor – 1/4" Shank
Part No. 12977
Arbor – 6 mm Shank
Both arbors accept accessories up to 1" (25 mm) wide which
have 1/2" (13 mm) dia. center hole.
Part No. 12980
Arbor – 3/8"-24 Female Thread
Mounts to 3/8"-24 male spindle tools.
Included with 52052 Lightweight Dyninger.
Threaded
Mandrels
For Use with DynaStrip Discs
Drill Chucks
With Mated Keys
Keys Included with
all Drill Chucks
Wheel Mounting
Adapter Kit


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.