AbrasiveStore.com

Dynabrade: SuperFinisher Slow-Speed Microfinishing Machine

 

Model
Number
Length
Inch (mm)
Width
Inch (mm)
Height
Inch (mm)
Machine Weight
Pound (kg)
Motor
hp (W)
Oscillation
Amplitude
Electrical
Volts / Phase / Hz
Air Inlet
Thread
Abrasive Advance
Inch (mm) Per Minute
32 (813)
13 (330)
18 (457)
115 (52.16)
.5 (373)
1/4"
115 / 1 / 60
1/4" NPT
1/16 (1.53) - 1-1/2 (38)
32 (813)
13 (330)
18 (457)
115 (52.16)
.5 (373)
1/4"
230 / 1 / 60
1/4" NPT
1/16 (1.53) - 1-1/2 (38)
32 (813)
13 (330)
18 (457)
115 (52.16)
.5 (373)
1/4"
230 / 1 / 50
1/4" NPT
1/16 (1.53) - 1-1/2 (38)
SuperFinisher
Slow-Speed Microfinishing Machine
Achieves Consistent, Repeatable Finishes
FOR MICROFINISHING ROLLS
1"- 4" wide (25 mm-102 mm)
Adaptable
Control Box
Mounts on back or
side of SuperFinisher
or remotely with
optional 15' flexible
conduit for optimal
customization
to your lathe.
Locking Controls
Control knobs lock to maintain
exact repeatability. Also
reduces the possibility
of setting changes
if machine is
bumped.
Maintenance Hour Meter
Allows operator to see when to grease bushings on the
oscillating head, extending the service life of unit.
Mounting Bracket
Has ground face for easier
setup. Mounts to lathe in
less than 5 minutes!
Changeable
Contact
Wheels
1", 2", 3" and
4" wide Contact
Wheels are
mountable
for a variety
of applications.
5" Diameter
Contact Wheel
Allows 2" shoulder
clearance on workpiece.
Adjustable Abrasive Roll Feed
Adjustable from 1/6" to 1-1/2" per minute, allowing
abrasive to be fully consumed, eliminating waste of
expensive abrasives.
Precision Air Pressure Regulator
Ensures a uniform contact force between the
workpiece and roller.
SuperFinisher achieves repeatable high-quality
finishes on cylindrical parts and rolls. Moving microfinishing rolls as slowly
as 1/16" per minute, finishes are achieved of less than 1 Ra, and are
repeatable at any time! Ideal on tungsten carbide, chilled iron, stainless steel,
tool steel, forged steel, chrome plating, nickel, brass, copper, aluminum, epoxy,
thermal spray, composites, stone, ceramics, polyurethane, rubber and nylon.
For industries including steel mills, paper mills, textiles, aluminum rolls, film
extruders, decorative stainless, copper foil electron-deposition and more.
Features & Benefits
Model 64000  115 Volt
Model 64001  230 Volt
Mounts to standard machine shop lathes in 5 minutes!
Constantly advances new abrasive at a speed from 1/16" to 1-1/2" per minute.
Precision air pressure regulator ensures a uniform contact force between the
workpiece and roller.
Abrasive speeds as low as 1/16" means utilizing all the abrasive, extending
the abrasive life and eliminating re-use of roll with possible variance in finish.
Designed with new diamond abrasives in mind.
Replaces polishing steps – using diamond super-abrasives and lapping film,
finishes less than 1 Ra are attainable.
Compact design makes the unit easier to fit onto almost any
size lathe, and provides good visibility of workpiece.
Balanced oscillating head with adjustable 0-15
cycles/second for smooth operation.
Front-of-lathe or back-of-lathe mounting configuration for
user preference or lathes without reverse rotation.
No tools needed to change abrasive rolls. Simple pneumatic
clamping mechanism for quick abrasive changes.
GFI protection.


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.