AbrasiveStore.com

Dynabrade: Dynascaler Air-Powered Descaling & Surface Preparation Tool

 

Model
Number
Motor
hp (W)
RPM
Free Speed
RPM
Under Load
Sound
Level
Maximum Air Flow
SCFM (L/Min)
Hose I.D. Size
Inch (mm)
Spindle
Thread
Weight
Pound (kg)
Length
Inch (mm)
Height
Inch (mm)
1.7 (1,268)
3,000
1,650
94 dB(A)
78 (2,209)
1/2 (13)
44.2 (20)
8-3/4 (222)
11 (279)
4.0 (2,983)
3,000
1,650
94 dB(A)
127 (3,597)
1/2 (13)
54 (24.5)
8-3/4 (222)
11 (279)
.7 (522)
3,400
2,100
94 dB(A)
38 (1,076)
1/2 (13)
33.2 (15)
14 (355)
10-3/4 (273)
.7 (522)
3,400
2,400
92 dB(A)
38 (1,076)
1/2 (13)
1/2"-20 Male
6.2 (2.8)
11-3/4 (298)
8-1/4 (210)
.7 (522)
3,400
2,400
92 dB(A)
38 (1,076)
1/2 (13)
1/2"-20 Male
6.5 (2.9)
11-3/4 (298)
8-1/4 (210)
.7 (522)
3,100
1,950
94 dB(A)
38 (1,076)
1/2 (13)
1/2"-20 Male
6.5 (2.9)
11-3/4 (298)
8-1/4 (210)
Dynascaler
Air-Powered Descaling and Surface Preparation Tool
For Heavy-Duty Industrial, Marine, Construction Applications
Tune-Up Kit: No. 96260 Additional Specifications: Air Pressure 90 PSIG (6.2 Bar), Air Inlet Thread 3/8" NPT
All models use optional “bonded shot” flap assemblies.
Ideal for weld preparation, plus removing rust, oxide, scale,
old paint and tough coatings.
Hand-Held Models
Steel dowel pin (keepers) system allows easy flap loading and
unloading.
Four-position top handle adjusts for operator comfort.
Model 30304  Straight Line
For 2" wide work on inside of pipe.
Six-slot hub (2-1/4" wide) accepts optional “bonded shot” flap
assemblies. Adjustable for exact positioning of flap assemblies
to surface.
Model 30336  Straight Line
Model 30337  Right Angle
Each model is for 2" wide work on flat surfaces.
Ideal for removal of floor paint/coatings & for scarifying concrete.
Vacuum port accepts 1-1/2" diameter cuff.
Model 30337 is USA Government National Stock Number
389501149337.
Flap Assembly
Sold Separately
Model
30336
FOR “BONDED SHOT”
FLAP ACCESSORIES
Floor Models
Model 30303  2" Wide
Model 31600  3" Wide
Each model has 20-slot hub for
optional “bonded shot” flap
assemblies.
Adjustable edge guide assures
straight-line descaling.
(Not recommended for
use without edge
guide.)
Over-Under Model
Model 30200  1" Wide Top and Bottom
Mechanically fractures scale and coatings, with negligible removal of base metal.
“Over-under” simultaneous removal of scale, from top and bottom of girder
webplates prior to welding.
Top and bottom unit each use optional 1" wide “bonded shot” flap assemblies.
Top unit easily detaches to permit portable “touch up” descaling.
Model
30304
Model
30200
Model
30303


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.