AbrasiveStore.com

Dynabrade: "Two-Step" System Tools Utilizing Mini-Orbital Sander & Dynabuffer

 

“Two-Step” System Tools
Utilizing Mini-Orbital Sander and Dynabuffer
Proven Method for Repairing Minor Surface Defects in Clearcoat
FOR ABRASIVE DISCS
OR POLISHING BUFFS
SOLD SEPARATELY
STEP ONE TOOLS
Choose One of These Models:
Model 58037  12,000 RPM
Right Angle Denibber
(All models on that page may be used.)
Model 57502 7,500 RPM
Palm-Style Mini-Dynorbital Sander
Model 57503 (5,000 RPM) may also be used.
Model 69502  7,500 RPM
Palm-Style Mini-Dynorbital
Silver Supreme Sander
Model 57503 (5,000 RPM) may also be used.
Model 58037
(12,000 RPM)
Model 69502
(7,500 RPM)
STEP TWO TOOLS
Choose One of These Models:
Model 57126 Dynabuffer
3" Diameter, Rear Exhaust
Model 55126 Dynabuffer
3" Diameter, Rear Exhaust
Model 58455 Dynabuffer
5" Diameter, Rear Exhaust
Model
57126
Model
58455
Model
55126
Model 57502
(7,500 RPM)
STEP ONE: SANDING
Choose One of These Models:
Model 58037  Right Angle Denibber
Model 57502  Palm-Style Mini-Dynorbital Sander
Model 69502  Palm-Style Mini-Dynorbital Silver Supreme Sander
Attach abrasive disc to sanding pad, then apply water
to abrasive disc.
Place sanding pad on surface defect, positioning pad
slightly off-center. Apply light pressure.
Throttle tool ON, and sand in random motion for about
two seconds.
Keep sanding pad FLAT on surface while sanding,
allowing tool and abrasive to do the work. Try to keep
sanded area as small as possible.
With tool still running, move tool OFF work surface
and then stop it.
Wipe surface dry with clean, soft cloth.
STEP TWO: BUFFING
Choose One of These Models:
Model 57126  Dynabuffer
Model 55126  Dynabuffer
Model 58455  Dynabuffer
Apply small amount of polishing compound to optional
buffing pad attached to Dynabuffer. Spread compound
evenly to precondition pad.
Apply small drop of polishing compound to work surface.
Use pad to spread compound evenly over sanded area of
surface.
Place pad on sanded area and apply pressure
(approximately 3 lbs./1.4 kg of pressure).
Throttle tool ON, and adjust pressure to minimize
vibration (finding the “sweet spot”).
Move pad in random motion, keeping pad flat or tipped
slightly forward.
Throttle tool OFF with pad still on surface (“start ON and
stop ON”).
Wipe surface dry with clean, soft cloth.
If imperfections are still visible, repeat Two-Step System.
Model
57126
Model
55126
Model
69502
Model
58037


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.