AbrasiveStore.com

Dotco/Cleco: General Accessories

 

General Accessories
Dotco & Cleco
Overhose Assemblies
For use with Dotco series rear exhaust tools:
Overhose
Non-Overhose
Overhose Only
Airhose Only
Tool Series
and
to Overhose
Length
Length
Airhose
Conversion Kit
Part No.
Part No.
ft.
m
ft.
m
10-04
1.0
0.3
5.0
1.5
2.0
0.6
5.0
1.5
4.0
1.2
5.0
1.5
12-03, 12-04
1.0
0.3
5.0
1.5
2.0
0.6
5.0
1.5
4.0
1.2
5.0
1.5
10-10, 10-11, 10-12
2.0
0.6
8.0
2.4
4.0
1.2
8.0
2.4
8.0
2.4
8.0
2.4
12-10, 12-11, 12-12
2.0
0.6
8.0
2.4
12-13, 15LF, 15-14
4.0
1.2
8.0
2.4
8.0
2.4
8.0
2.4
10-20, 10-21, 10-22
2.0
0.6
8.0
2.4
10-25, 10-26, 10-27
4.0
1.2
8.0
2.4
12-20, 12-21, 12-22
8.0
2.4
8.0
2.4
12-25, 12-26, 12-27,
12-28, 15LS, 15lN
12-91
4.0
1.2
5.0
1.5
14CF
4.0
1.2
8.0
2.4
14CS
2.0
0.6
8.0
2.4
4.0
1.2
8.0
2.4
8.0
2.4
8.0
2.4
8.0
2.4
8.0
2.4
14CN
2.0
0.6
8.0
2.4
4.0
1.2
8.0
2.4
8.0
2.4
8.0
2.4
8.0
2.4
8.0
2.4
Airline Filter and Lubricator
Swivel Hose Couplings
Part Number
NPT in.
1/4
3/8
1/2
Quick Disconnect Fittings
Part
NPT
Air Flow
Max. Pressure
NPT
Nominal Size
Number
Description
Fitting Type*
in.
SCFM
m3/min
psig
bar
in.
1/4”
3/8”
1/2”
Filter w/cartridge*
1/4
17
8.0
100
6.9
Coupler (male NPT)
Filter cartridge
1/8
Lubricator**
1/4
22
10
100
6.9
1/4
Lubricator**
3/8
22
10
100
6.9
3/8
GENERAL: Use where inconvenient for standard filter or lubricator.
1/2
* NOTE: Filter will not remove water.
Coupler (female NPT)
** NOTE: One ounce reservoir good for an average eight hour shift.
1/4
3/8
Nipple (male NPT)
1/8
1/4
3/8
1/2
Nipple (female NPT)
1/4
3/8
Air Hoses
1/2
Nipple (with hose barbs)
Part
Hose I.D.
Fittings (NPT)
Length
Number
in.
mm
in.
mm
ft.
m
1/4**
3/16
4.7
1/8
3/8-24*
6.0
1.8
1/2**
3/16
4.7
1/8
1/8
6.0
1.8
* NOTE: Nipples of one size will not fit couplers of another size.
3/16
4.7
1/8
1/4
7.0
2.1
** NOTE: Indicates inside diameter of hose.
1/4
6.4
1/4
1/4
8.0
2.4
NOTE: 1/4” nominal will pass 49 cfm free air @ 90 psi, but pressure drop
exceeds 10 psi with air flow over 30 cfm.
1/4
6.4
1/8
1/4
8.0
2.4
3/8” nominal will pass 90 cfm free air @ 90 psi, but pressure drop exceeds 10 psi
5/16
7.9
1/4
1/4
8.0
2.4
with air flow over 53 cfm.
3/8
9,5
3/8
3/8
10
3.0
1/2” nominal will pass 168 cfm free air @ 90 psi, but pressure drop exceeds 10
psi with air flow over 109 cfm.
1/2
12.7
3/8
1/2
10
3.0
1/2
12.7
1/2
1/2
12
3.7
1/2
12.7
1/2
1/2
25
7.6
GENERAL: 3/16” & 1/4” hoses have braided covers, all others have neoprene covers.
* NOTE: 3/8”-24 is a straight thread
Activeswivel
Steel Handle Bushings
Part No.
NPT
Air Flow
Max. Pressure
Weight
Part Number
Size
in.
SCFM
m3/min
psig
bar
lbs.
kg
1/4 in. MPT x 1/4 in. FPT
1/4
25
7.1
150
10.4
0.20
0.09
841554
1/4 in. MPT x 1/4 in. FPT
3/8
45
12.7
150
10.4
0.40
0.18
3/8 in. MPT x 1/4 in. FPT
1/2
65
18.4
150
10.4
0.80
0.36
3/8 in. MPT x 3/8 in. FPT
1/4
25
7.1
150
10.4
0.25
0.11
* Light duty for rotary tools
* NOTE: Equipped with built-in flow regulator.
Heavy duty for percussion tools.
Lubricants
Service Tools
Part Number
Size
Description
M.S.D.S. No.
“T” Wrenches
Oils
Part Number
Description
1 qt. plastic
Air line oil
CPT-153
3/16” Hex socket screws
1 gal. metal
Air line oil
CPT-153
To remove and replace hex socket screws in tool housings.
1 gal. metal
High film strength
CPT-154
1 qt. plastic
Air line oil (Dotco)
CPT-155
1 gal metal
Air line oil (Dotco)
CPT-155
1 qt. plastic
Hydraulic oil (Pulse)
CPT-157
Greases
18 oz. can
Teflon grease
CPT-145
2 oz. tube
Dotco gear grease
CPT-147
2 oz. tube
Dotco gear lube
CPT-148
NOTE: Under normal conditions of use, lubrication products sold separately
for or used within these tools should not cause an exposure hazard. Refer to
the Material Safety Data Sheet (M.S.D.S.) for Safety and Disposal information.
M.S.D.S. sheets shown in the chart are available upon request.
Hex Key Wrenches
Part Number
Description
1/8”
3/16”
Push Type Grease Gun
Part Number: 45-1982
(Dotco lube sold separately - see above)
Open End Wrenches
Part Number
Description
3/16” & 5/16”
7/16”
1/2”
9/16” & 1-33/64” Hex Box
11/16”
7/8”
1-1/8”
Snap Ring Pliers
Part No.
Description
External sizes 25 thru 87
Part No.
Description
External sizes 37 thru 93


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.