AbrasiveStore.com

Dotco/Cleco: Saws

 

Saws
Specialty Tools
DOTCO 12-22 Series
14,000 RPM 0.6 hp (0.45 kW)
• Available in right angle or inline
• Compact and easy to use
• Excellent control and high productivity with minimum fatigue
• Easy to change blades
• Adjustable depth control
Free Speed
Saw Blade
Maximum Depth
Air Inlet
Part No.
(rpm)
Configuration
Capacity
of Cut
Type Housing
Weight
Length
Size
14,000
Right Angle
2.5"
9/16 in
Composite
2.3 lb | 1.04 kg
10.9 in | 277 mm
1/4 in
14,000
Inline
2.5"
9/16 in
Composite
2.1 lb | 0.95 kg
8.9 in | 226 mm
1/4 in
All tools performance rated @ 90psi / 620 kPa air pressure.
Minimum Hose I.D.: 5/16in / 7.9mm
Standard Equipment: Applicable wrenches, oilless blades
DOTCO 12-12 Series - Saw
2,400 - 20,000 RPM 0.3 hp (0.22 kW)
• Vacuum ready
• Compact and easy to use
• Easy to change blades
• Adjustable depth control
Free Speed
Saw Blade
Maximum
Air Inlet
Part No.
Exhaust
(rpm)
Capacity
Depth of Cut
Type Housing
Weight
Length
Size
Rear
2,400
2.0"
7/16 in
Composite
1.6 lb | 0.73 kg
8.9 in | 226 mm
1/4 in
Rear
3,600
2.0"
7/16 in
Composite
1.6 lb | 0.73 kg
8.9 in | 226 mm
1/4 in
Front
12,000
2.0"
7/16 in
Composite
1.3 lb | 0.59 kg
7.1 in | 180 mm
1/4 in
Vacuum Ready
12,000
2.0"
7/16 in
Composite
2.3 lb | 1.04 kg
7.1 in | 180 mm
1/4 in
Rear
12,000
2.0"
7/16 in
Composite
1.3 lb | 0.59 kg
7.1 in | 180 mm
1/4 in
Front
20,000
2.0"
7/16 in
Composite
1.3 lb | 0.59 kg
7.1 in | 180 mm
1/4 in
Vacuum Ready
20,000
2.0"
7/16 in
Composite
2.3 lb | 1.04 kg
7.1 in | 180 mm
1/4 in
Rear
20,000
2.0"
7/16 in
Composite
1.3 lb | 0.59 kg
7.1 in | 180 mm
1/4 in
All tools performance rated @ 90psi / 620 kPa air pressure.
Minimum Hose I.D.: 1/4in / 6.4mm
Standard Equipment: Applicable wrenches, oilless blades
DOTCO 12-27 Series - Saw
430 - 11,000 RPM 0.9 hp (0.67 kW)
• Compact and easy to use
• Excellent control and high productivity with minimum fatigue
• Easy to change blades
Free Speed
Saw Blade
Maximum
Air Inlet
Part No.
Exhaust
(rpm)
Capacity
Depth of Cut
Type Housing
Weight
Length
Size
Rear
430
4 in
1 in
Composite
6.2 lb | 2.81 kg
16.2 in | 411 mm
1/4 in
Rear
940
3.375 in
1 in
Composite
6.2 lb | 2.81 kg
16.2 in | 411 mm
1/4 in
Rear
3,200
4 in
1 in
Composite
5.2 lb | 2.36 kg
14.5 in | 368 mm
1/4 in
Rear
4,700
2.5 in
9/16 in
Composite
4.6 lb | 2.09 kg
13.2 in | 335 mm
1/4 in
Rear
4,700
3.375 in
1 in
Composite
5.2 lb | 2.36 kg
14.5 in | 368 mm
1/4 in
Vacuum Ready
7,000
3.375 in
1 in
Composite
6.5 lb | 2.95 kg
14.1 in | 358 mm
1/4 in
Vacuum Ready
8,500
4 in
1 in
Composite
7.2 lb | 3.27 kg
14.1 in | 358 mm
1/4 in
Vacuum Ready
8,500
4 in
1 in
Composite
6.5 lb | 2.95 kg
14.1 in | 358 mm
1/4 in
Front
9,000
4 in
1 in
Composite
4.8 lb | 2.18 kg
11.4 in | 290 mm
1/4 in
Front
11,000
3.375 in
1 in
Composite
4.8 lb | 2.18 kg
11.4 in | 290 mm
1/4 in
All tools performance rated @ 90psi / 620 kPa air pressure.
Minimum Hose I.D.: 5/16in / 7.9mm
Standard Equipment: Applicable wrenches, oilless blades, 3/4in Arbor adapter
DOTCO 12-42 Series - Saw
5,800 - 8,600 RPM 1.7 hp (1.27 kW)
• Adjustable depth control
• Easy to change blades
• Compact and easy to use
Free Speed
Saw Blade
Maximum
Air Inlet
Part No.
Exhaust
(rpm)
Capacity
Depth of Cut
Type Housing
Weight
Length
Size
Front
5,800
4.0"
1 in
Composite
7.9 lb | 3.58 kg
15.5 in | 394 mm
1/4 in
Front
7,200
4.0"
1 in
Composite
7.9 lb | 3.58 kg
15.5 in | 394 mm
1/4 in
Vacuum with PortaBag
8,500
4.0"
1 in
Composite
9.9 lb | 4.49 kg
17.0 in | 432 mm
1/4 in
Vacuum with Floor Bag
8,500
4.0"
1 in
Composite
9.2 lb | 4.17 kg
17.0 in | 432 mm
1/4 in
Front
8,600
4.0"
1 in
Composite
7.9 lb | 3.58 kg
15.5 in | 394 mm
1/4 in
Vacuum Ready
8,500
4.0"
1 in
Composite
9.2 lb | 4.17 kg
17.0 in | 432 mm
1/4 in
All tools performance rated @ 90psi / 620 kPa air pressure.
Minimum Hose I.D.: 1/2in / 12.7mm
Standard Equipment: Applicable wrenches, oilless blades, 3/4in Arbor adapter
Saw
Accessories
Maximum Depth
Recommended Use
Part Number
Diameter
Type
& Width of Cut
Max.
rpm
(Guidelines only)
Saw Blades – 1/4” arbor hole
1 1/4”
High Speed Steel 22 Teeth
3/32” x 1/16”
12,000
Aluminum, Laminated Plastics, Pressed Board, Wood
1 1/4”
High Speed Steel 44 Teeth
3/32” x 1/16”
12,000
Aluminum, Laminated Plastics, Pressed Board, Wood
1 1/2”
High Speed Steel 22 Teeth
7/32” x 1/16”
12,000
Aluminum, Laminated Plastics, Pressed Board, Wood
2”
High Speed Steel 22 Teeth
7/16” x 1/16”
12,000
Aluminum, Laminated Plastics, Pressed Board, Wood
2”
High Speed Steel 44 Teeth
7/16” x 1/16”
12,000
Aluminum, Laminated Plastics, Pressed Board, Wood
2”
High Speed Steel 60 Teeth
7/16” x 1/16”
12,000
Aluminum, Laminated Plastics, Pressed Board, Wood
1 1/2”
Carbide Chip 36/80 Grit
7/32” x 3/32”
20,000
Fiberglass, Rubber
2”
Carbide Chip 36/80 Grit
7/16” x 3/32”
20,000
Fiberglass, Rubber
1 1/2”
Diamond Chip 40/60 Grit
7/32” x 5/64”
20,000
Fiberglass, Rubber
2”
Diamond Chip 40/60 Grit
7/16” x 5/64”
20,000
Fiberglass, Rubber, Carbon Fiber
*CAUTION: Use only for sawing non-metallic materials.
Part Number
Diameter
Type
Maximum
Use With
Recommended Use Up To
Depth of Cut
Model
(Guidelines only)
Saw Blades – 7/16” arbor hole
2 1/2”
High Speed Steel 44 Teeth
9/16”
1/4” Aluminum, 1/2” Plywood, 1/2” Phenolic
2 1/2”
High Speed Steel 80 Teeth
9/16”
16 Gauge Steel
3 3/8”
High Speed Steel 60 Teeth
15/16”
1/4” Aluminum, 1/2” Plywood, 1/2” Phenolic
3 3/8”
High Speed Steel 80 Teeth
15/16”
20 Gauge Steel, Paneling, Plywood
2”
High Speed Steel 22 Teeth
7/16” x 1/16”
Aluminum, Laminated Plastics, Pressed Board, Wood
2”
High Speed Steel 44 Teeth
7/16” x 1/16”
Aluminum, Laminated Plastics, Pressed Board, Wood
2”
High Speed Steel 60 Teeth
7/16” x 1/16”
Aluminum, Laminated Plastics, Pressed Board, Wood
Part Number
Diameter
Type
Maximum Depth
Recommended Use
& Width of Cut
(Guidelines only)
Saw Blades – 3/4” arbor hole
4”
Carbide Chip 36/80 Grit**
1” x 1/8”
Fiberglass, Hard Rubber
4”
Carbide Chip 36 Grit
1” x 11/64”
Hard Rubber
4”
Carbide Chip 80 Grit
1” x 1/8”
Fiberglass
4”
Carbide Tip 20 Teeth
1” x 7/64”
Thin Fiberglass, Plastic Laminates to 1/8” thick
4”
Carbide Tip 20 Teeth
1” x 7/64”
Thicker Fiberglass, Plastic Laminates to 1/2” thick
4”
Carbide Tip 20 Teeth
1” x 7/64”
Thin non-ferrous material (to approx. 1/8” thick)
4”
Carbide Tip 12 Teeth
1” x 7/64”
Thicker non-ferrous material (to approx. 1/2” thick)
4”
Diamond Chip 60/80 Grit
1” x 5/64”
Fiberglass, Composite, Carbon Fiber
*CAUTION: These carbide chip and tip and diamond blades are not to be used on metallic materials.
**Slim blade for easy cutting of fiberglass, with minimum dust -36 grit on periphery and 80 grit on the sides.
Part Number
Diameter
Type
Maximum Depth
Recommended Use
& Width of Cut
(Guidelines only)
Saw Blades – Dotco oscillating saws with 3/8” arbor hole
2”
Carbide Chip 36/80 Grit
7/16” x 3/32”
Fiberglass
2”
Diamond Chip 40/60 Grit
7/16” x 5/64”
Fiberglass, Carbon Composites
2 1/2”
Stainless Steel 124 Teeth
9/16” x 3/64”
Wood, Uncured or Cured Composites, Aluminum, Plastic
2 1/2”
Flush Stainless 124 Teeth
9/16” x 3/64”
Wood, Uncured or Cured Composites, Aluminum, Plastic
2 1/2”
Carbide 120 Teeth
9/16” x 1/16”
Cured Graphic Composites
2 1/2”
Razor
9/16” x 3/64”
Cardboard, Light Plastic
2 1/2”
Stainless Steel 120 Teeth
9/16” x 3/64”
Confined Space
3”
Razor
9/16” x 3/64”
Cardboard, Light Plastic
*Use only for sawing non-metallic materials.
Vacuum Conversion Kits
DOTCO 12-27 series
DOTCO 12-42 series
To convert an existing Dotco front exhaust series 12-27 saw to
To convert an existing Dotco front exhaust series 12-42 saw to
Vacuum operation, order any of the conversion kits listed in the
Vacuum operation, order any of the conversion kits listed in the
table. Refer to the Vacuum Ready models listed on page 101 as
table. Refer to the Vacuum Ready models listed on page 102 as
a guideline to selection. NOTE: When converting to vacuum, free
a guideline to selection. NOTE: When converting to vacuum, free
speed of the tool will be reduced 20%.
speed of the tool will be reduced 20%.
Part Number
Converts front exhaust to this configuration
Part Number
Converts front exhaust to this configuration
Option 1 – Porta Bag
Option 1 – Porta Bag
Option 2 – Floor Bag
Option 2 – Floor Bag
Option 3 – Vacuum System Adapter
Option 3 – Vacuum System Adapter


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.