AbrasiveStore.com

Dotco/Cleco: Belt Sanders

 

Sanders & Polishers
Accessories
Belt Sander Attachments
Dotco 12-12 and 12-13 series.
300 Series Collet
1/4”-28 Internal Thread
Sanding Belt Size
Sanding Area
-36 Termination
-32 Termination
in.
mm
in.
mm
Non-Woven Attachments (used with 12,000 rpm 12-12 series)
1/2” x 18”
13 x 457
1/2” x 6”
13 x 152
Coated Abrasive Attachments (used with 12,000 rpm 12-12 series; 20,000 rpm 12-12 & 12-13 series)
1/4” x 12”
6.4 x 305
1/4” x 4”
6.4 x 102
1/2” x 12”
13 x 305
1/2” x 4”
13 x 102
1” x 12”
25 x 305
1” x 4”
25 x 102
1/2” x 24”
13 x 610
1/2” x 10”
13 x 254
1” x 24”
25 x 610
1” x 10”
25 x 254
Sanding Belts – Aluminum Oxide, Resin Bond
For use with Dotco belt sanders. Minimum order: 10 of any one belt.
Belt Number
Grit Size
1/4” x 12
1/2” x 12
1” x 12
1/2” x 24
1” x 24
1/4” x 18
1/2” x 18
3/4” x 18
40
50
60
80
100
120
150
180
240
320
Sanding Belts – Non-woven
Minimum order: 10 of any one belt.
Part Number
Grit Size
1/4” x 18
3/4” x 18
Extra Fine
Fine
Medium
Coarse
Spiralcool™ Backing Pads
Sanding Pad Nut
For Dotco sanders with 5/8”-11 threaded spindles. Pad contour develops draft
For use with Dotco sanders
action to cool disc and avoid excessive pick-up.
with 5/8”-11 threaded spindles.
Part Number – Pad Diameter (Max. rated RPM)
Part Number
Tool Series
Flexibility
4”
4 1/2”
5”
7”
9”
5/8”-11 threaded spindle
12,000 rpm
11,000 rpm
10,000 rpm
7,000 rpm
6,000 rpm
Flexible
Medium
Rigid
Spanner Wrench
For use with 14-2118
Sanding Nut Pad.
Part Number
Tool Series
Save-A-Disc Pads
5/8”-11 threaded spindle
For Dotco sanders with 5/8”-11 threaded spindles.
Ribs on the backing plate cause a flexing action
which throws off accumulation.
Part Number
Diameter
Max. rpm
Assembly
Pad Only
Plate Only
Nut Only
5”
7,500
Sanding Disc Cutter
7”
7,500
An adjustment scale allows a 9” maximum diameter
9”
7,500
sanding disc to be cut down to 3” or 4” diameter.
The double bevel cutting edge assures a round cut
without a loose edge or raveling.
PSA Disc Holders
Part Number
Description
Disc Cutter
Collet Chuck:
Chuck the PSA disc holder shank
Replacement Blades
directly into the appropriate collet (1/8” or 1/4”).
Upper
Lower
Threaded Spindle:
Remove the threaded shank from the PSA disc holder. Referring to
the spindle adapter chart, select the correct spindle and thread it
into the PSA holder.
Mini Chucks
Part
Disc Holder
Shank
PSA Disc
Number
Diameter
Assembly
Holder Thread
For use with Dotco 12-12 series.
To adapt right angle threaded spindle sanders for
1/2”
1/8”
5-40 Female
drilling, disc sanding with PSA holders, and light grinding.
1/2”
1/4”
5-40 Female
3/4”
1/8”
5-40 Female
Part Number
Shank Size
3/4”
1/4”
5-40 Female
Assembly
Collet
1”
1/8”
5-40 Female
1/8”
1”
1/4”
5-40 Female
1/4”
1-1/2”
1/4”
1/4”-20 Female
6 mm
2”
1/4”
1/4”-20 Female
* NOTE: For 1/4”-28 internal thread
3”
1/4”
1/4”-20 Female
** NOTE: For 5/16”-24 internal thread – 1/8” collet
*** NOTE: For 3/8”-24 internal thread – 1/4” collet
4”
1/4”
1/4”-20 Female
Spindle Adapters
For use with PSA Disc holders.
Adapter Description
Part Number
Thread
Thread
Max.
(for Tool Spindle)
(for PSA Disc Holder)
Disc Dia.
1/4”-28 Male
5 -40 Male
1”
1/4”-28 Male
1/4”-20 Male
4”
5/8”-11 Male
5/16”-24 Male
4”
5/8”-11 Male
1/4”-20 Male
4”
5/8”-11 Female
3/8”-24 Male
4”


Return to Manufacturer Index

© 2018 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.