Monroe Fluid Technology
ASTRO-CUT SYN
Heavy duty oil-free synthetic cutting and grinding fluid
ASTRO-CUT SYN is a heavy-duty oil-free synthetic cutting and grinding fluid concentrate designed to offer outstanding machining performance as well as excellent corrosion control on machinery and workpieces while providing a long sump life.
ASTRO-CUT SYN is a heavy-duty oil-free synthetic cutting and grinding fluid concentrate designed to offer outstanding machining performance as well as excellent corrosion control on machinery and workpieces while providing a long sump life.
This product may be used on a variety of metals, including steels, cast iron and aluminum; in operations ranging from grinding to turning to milling.
Applications:
ASTRO-CUT SYN has been designed for machining most metals except magnesium. Excellent on cast iron. This product may also be used for grinding: blanchard, diamond wheel, centerless, belt, disk, etc.
NOTE: Since this product is completely oil-free, it may be used in most coolant mist units for machining and grinding operations.
Advantages:
- Superior Machining Lubrication
- Nitrite-Free
- Chlorine-Free
- Phenol-Free
- Very Low Foam - Excellent on High Pressure, High Speed Machining
- Excellent Corrosion Inhibition
- Long Tank Life
- Excellent Cooling for Ability to Maintain Close Tolerances
- Tolerant of Hard Water
- Resistant to Damage from Tramp Oil
- Water Extendable-Economical
Properties: | |
|---|---|
|
Blue Liquid, Slight Haze
|
|
Transparent Blue Liquid
|
|
Bland
|
|
Soft, Soluble
|
|
9.5 ± 0.3
|
|
1.03 ± 0.01
|
|
8.6 ± 0.1
|
|
None
|
Concentration - ASTRO-CUT SYN:
|
4% (1:25) | 5% (1:20) | 7% (1:14) | 10% (1:10) |
|
1.3 | 1.6 | 2.2 | 3.2 |
An optical refractometer may be used for determining concentration. These numbers are typical and are not to be construed as specifications.
Recommended Starting Dilutions: | |
|---|---|
|
10:1 / 20:1 (5%)
|
|
25:1
|
|
30:1 / 40:1 ( 2.5%)
|
Product Data SheetThe information presented on this page is for informational purposes only. Please ensure the accuracy of the data from the manufacturer's Product Data Sheet and Material Safety Data Sheets listed above.
