AbrasiveStore.com

Dynabrade

« return to manufacturer index

 

Versatility Grinder Contact Arms

Part No.CommentsBelt Size
(W x L)		Contact Wheel Assembly
(incld. bearing & shaft)		Platen Pad
  • Work on broad areas
  • Leave in-line scratch
  • Blend spot welds
1/2" x 72"
11088 - 5/8" dia. x 3/8" wide, rubber
11025 - 1/2" wide
  • Enter channels as small as 7/16"
1/2" x 72"
11068 - 5/16" dia. x 3/8" wide, steel
11027 - 1/2" wide
  • Enter 5/16" x 3/4" openings
1/4" x 72"
11074 - 5/8" dia. x 1/8" wide, rubber
11032 - 1/4" wide
  • Grind over contact wheel or platen
  • Order 11312 for heavy-duty, or 11325 for steel platen version
1/2" x 72"
11078 - 5/8" dia. x 3/8" wide, rubber
11025 - 1/2" wide
  • Unique offset design
  • Strap polishing is easy with this arm
1/8", 1/4", 5/16" or 1/2" x 72"
11080 - 1" dia. x 3/8" wide, radiused rubber
 None
  • Order 11326 for heavy-duty steel construction version
5/8" or 3/4" x 72"
11282 - 3/4" dia. x 5/8" wide, rubber
11109 - 3/4" wide
11220113001130111341
  • Offset design and miniature contact wheels
  • 2" strap polish in offset area; polish turbine blades and other contours
11220: 5/8" or 3/4" x 72"

All Others: 1/2" x 72"
11220: 11352 - 5/16" x 5/8" wide, steel

11300: 11332 - 1/4" x 3/8" wide, steel

11301: 11068 - 5/16" x 3/8" wide, steel

11341: 11342 - 5/16" x 3/8" wide, rubber
11220: None

11300: None

11301: None

11341: None
  • Grind corners, enter grooves, strap polish
  • "V" shape wheel
1/8" or 1/4" x 72"
11086 - 1" dia. x 3/8" wide, urethane, tapered
 None
  • 11024 Steel Platen available
  • 6-3/4" workable reach
1/2" x 78"
11078 - 5/8" dia. x 3/8" wide
11025 - 1/2" wide
  • Grind on wheel or platen
  • 5-1/4" reach
5/8"or 3/4" x 74-1/2"
11282 - 3/4" x 5/8" wide, rubber
11109 - 3/4" wide
  • File round openings as small as 7/16"
1/4" x 72"
11066 - 5/16" dia. x 1/8" wide, steel
11034 - 1/4" wide
  • For flat grinding using platen at or near corners and edges of large radius round
  • Contact wheel is offset to prevent gouging
1/2" x 72"
5/8" dia. x 3/8" wide, rubber
11026 - 1/2" wide
  • Work on contact wheel or platen pad
1/2" x 72"
11070 - 7/16" dia. x 3/8" wide, rubber
11025 - 1/2" wide
  • Guide-cut
  • Removes raised material within .020" or less without undercutting
1/2" x 72" 60 to 80 grit
11090 - 5/8" dia. x 3/8" wide, rubber
 None
  • Extra length arm
  • 17" workable reach
1/2" x 98"
11078 - 5/8" dia. x 3/8" wide, rubber
11025 - 1/2" wide
  • Enter 1/2" x 1/2" openings
1/4" x 72"
11072 - 7/16" dia. x 1/8" wide, brass
11034 - 1/4" wide
  • Enter channels as narrow as 9/16"
1/2" x 72"
11076 - 7/16" dia. x 3/8" wide, steel
11027 - 1/2" wide
  • 45 PSIG maximum
  • Excellent for cleaning oxide off electrical bus bars
  • Arm has a 12" workable reach
3/4" x 88"
11352 - 5/16" dia. x 5/8" wide, steel
 Optional 3/4" wide
  • Unique offset design
  • Grind over contact wheels or strap polish
1/2" x 72"
11078 - 5/8" dia. x 3/8" wide, rubber
 None
  • For flat grinding using platen pad
1" x 72"
15320 - 3/4" dia. x 7/8" wide
15323 - 1" wide
  • Allows for longer reach
  • Grind using platen pad
1" x 78"
15320 - 3/4" dia. x 7/8" wide
15323 - 1" wide
  • Great for strap polishing
1" x 78"
15348 - 70 durometer, 2" dia. x 1" wide, rubber
 None
  • Wide width for tight radius finishing
1" x 72"
65135 - 70 durometer, flat 5/8" dia. x 1" wide, urethane
 None
  • 3/8" (10 mm) wide radius wheel for blending
1/4" to 1/2" x 72"
11080 - 70 durometer, radiused 1" dia. x 3/8" wide, urethane
 None
  • Offset design for strap finishing
1/2" x 72"
11070 - 70 durometer 7/16" dia. x 1/2" wide, rubber
 None
67200672016720267203
  • Excellent for finishing shoulder areas as well as contact wheel grinding
67200: 1" x 72"

67201: 3/4" x 72"

67202: 5/8" x 72"

67203: 1/2" x 72"
67200: 11650 - 70 durometer, serrated 2" dia. x 1" wide, urethane

67201: 67045 - 70 durometer, serrated 2" dia. x 3/4" wide, urethane

67202: 67044 - 70 durometer, serrated 2" dia. x 5/8" wide, urethane

67203: 67043 - 70 durometer, serrated 2" dia. x 1/2" wide, urethane
67200: None

67201: None

67202: None:

67203: None
  • Unique split wheel design allows operator to grind up against work area shoulders without arm interference
1-1/2" x 72"
67181 - 70 durometer, serrated 2" dia., split wheel, urethane 2 Required
 None
  • Unique split wheel design allows operator to grind up against work area shoulders without arm interference
1-1/2" x 72"
67180 - 70 durometer 7/8" dia., split wheel, rubber 2 required
 None
  • Using contact wheel, grind with 1-1/4" wide abrasives; 1-1/16" radius or greater
1-1/4" x 72"
67101 - 70 durometer, serrated 2" dia. x 1-1/4" wide, urethane
 None
  • Using contact wheel, finish using 1-1/4" wide abrasives; 1/2" radius or greater
1-1/4" x 72"
67107 - 70 durometer 7/8" dia. x 1-1/4" wide, urethane
 None
  • Soft durometer contact wheel with smooth face for fine finishing applications
1-1/4" x 72"
67109 - 50 durometer, smooth
 None
  • 70 durometer wheel provides a firm support for abrasive belt to allow base finishing of channel areas
1/2" x 72"
67139 - 70 durometer, serrated 4" dia. x 1/2" wide, urethane
 None
  • Polish contours without gouging workpiece
5/8" to 1" x 72"
11642 - 40 durometer, serrated, scoop 4" dia. x 5/8" wide, rubber
 None
  • Blend fillet welds; excellent for tight radius work
1/2" to 1" x 72"
11638 - 70 durometer, severe radius 4" dia. x 1/2" wide, rubber
 None
  • Use contact wheel or platen area for grinding and finishing
1/2" x 72"
11078 - 70 durometer 5/8" dia. x 3/8" wide, rubber
11025 - Soft/sponge platen

Also accepts 11026 Hard/Cork
and 11027 Thin Platen
  • Cutlery contact arm assembly incorporates a large diameter contact wheel and a raised platen assembly for complete finishing capabilities
2" x 78"
67122 - 50 durometer, smooth 4" dia. x 2" wide, rubber
11839 - Hard/cork platen
  • Grind and deburr using either the serrated contact wheel or platen assembly
1" x 72"
11650 - 70 durometer, serrated 2" dia. x 1" wide, urethane
11605 - Hard/cork platen

Also accepts 11604 Soft/Sponge Platen
6721567216
  • Aggressive grinding applications
67215: 2" x 72"

67216: 1-1/2" x 72"
67215: 11847 - 70 durometer, serrated 2" dia. x 2" wide, urethane

67216: 65363 - 70 durometer, serrated 2" dia. x 1-1/2" wide, urethane
67215: None

67216: None
  • Using contact wheel, finish using 1-1/2" wide abrasives; 9/16" radius or greater
1-1/2" x 72"
65378 - 70 durometer, flat 1" dia. x 1-1/2", urethane
 None
  • Excellent for very fine finishing work; use when extreme conformability is necessary.
1" x 72"
67068 - 4" dia. x 1/2" wide cotton cushion
 None
  • Material removal applications, castings, etc.
2" x 72"
67116 - 2-3/4" dia. x 2" wide, rubber 90 durometer, serrated
 None
67220672216722267223
  • Turbine blade clusters
  • Great for strap polishing in offset areas
67220: 1/2" x 72"

67221: 1/2" x 72"

67222: 3/4" x 72"

67223: 1/2" x 72"
67220: 11332 - 1/4" dia. x 3/8" wide, steel

67221: 11068 - 5/16" dia. x 3/8" wide, steel

67222: 11352 - 5/16" dia. x 5/8" wide, steel

67223: 11342 - 50 durometer 5/16" dia. x 3/8" wide, rubber
67220: None

67221: None

67222: None

67223: None
  • Grind, blend and polish welds; strap polish using slack of belt.
1" x 72"
11620 - 40 durometer, rubber 4" dia. x 1" wide, smooth
 None
6722667227
  • Access tight areas
67226: 1/2" x 72"

67227: 1/2" x 78"
67226, 67227:
11049 - 3/16" dia. x 3/8" wide, steel; 3-1/8" reach, 3 required
67226: None

67227: None
  • Using contact wheel, finish using 1-1/4" wide abrasives; 1/2" radius or greater
1-1/4" x 72"
67105 - 50 durometer, 7/8" dia. x 1.2" wide, flat urethane
 None
  • Grind and polish implants
1/4" x 72"
11072 - 7/16" x 1/8" crowned brass
None
  • Excellent for finishing shoulder areas as well as contact wheel grinding
1" x 72"
67284 - 40 durometer, serrated 2" dia. x 5/8" wide, rubber
 None
  • Turbine blade clusters
  • Great for strap polishing in offset areas
1/2" x 72"
11332 - 1/4" dia. x 3/8" wide, flat steel
 None
  • Polish and Grind with slack of belt
1/2"-2" x 96" Slack Arm None
  • Polish golf club heads
  • Soft face excellent for polishing and blending
2" x 82"
67285 - 6" x 1-1/2" wide, coated fabric
 None
  • Excellent for finishing shoulder areas as well as contact wheel grinding
2" x 72"
67263 - 1-1/2" x 2" wide, flat rubber
 None
  • Work stop and guide keep grind perpendicular
  • Tight radius finishing
1" x 72"
65135 - 5/8" x 1" wide, flat urethane
 None


Return to Manufacturer Index

© 2012 AbrasiveStore.com  |  Contact  |  Privacy  |  XML Map  |  Site Map
All other trademarks, logos and copyrights are property of their respective owners.
Designed by MyRock.net