Dotco Cleco
Routers
Dotco
9,000 – 34,000 RPM
0.3 – 1.7 hp (0.22 – 1.27 kW)
0.3 – 1.7 hp (0.22 – 1.27 kW)
- All models oil free
- Patent pending governed design allows the tool to idle for long life but provides full power under load
- Roll valve gives easy, convenient operation
| Model Number | Free Speed rpm |
Type Housing | Shank Diameter Capacity | Weight | Length | Air Inlet Size | ||
|---|---|---|---|---|---|---|---|---|
| Front Exhaust | Side Exhaust | Rear Exhaust | ||||||
12-10 Series – 0.3 hp (.22 kW) |
||||||||
| 12L1001-36RT | 34,000 | C | 1/4" | 1.4 lbs. 0.6 kgs. |
6.7" 170mm |
1/4" | ||
| 12L1000-36RT | 30,000 | C | 1/4" | 1.4 lbs. 0.6 kgs. |
6.7" 170mm |
1/4" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Type Housing | Shank Dia. Capacity | Weight | Length | Air Inlet |
12-20 Series – 0.6 hp (.45 kW) |
||||||||
| 12L2000-01RT | 12L2080-01RT | 25,000 | C | 1/4" | 1.9 lbs. 0.9 kgs. |
7.5" 191mm |
1/4" | |
| 12L2001-01RT | 12L2081-01RT | 20,000 | C | 1/4" | 1.9 lbs. 0.9 kgs. |
7.5" 191mm |
1/4" | |
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Type Housing | Shank Dia. Capacity | Weight | Length | Air Inlet |
12-25 Series – 0.9 hp (.67 kW) |
||||||||
| 12L2500-01RT | 12L2580-01RT | 23,000 | C | 1/4" | 2.6 lbs. 1.2 kgs. |
7.1" 180mm |
1/4" | |
| 12L2582-01RT | 18,000 | C | 1/4" | 2.6 lbs. 1.2 kgs. |
7.1" 180mm |
1/4" | ||
| 12L2580-0124RT | 23,000 | C | 3/8" | 2.6 lbs. 1.2 kgs. |
7.1" 180mm |
1/4" | ||
| 12L2582-0124RT | 18,000 | C | 3/8" | 2.6 lbs. 1.2 kgs. |
7.1" 180mm |
1/4" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Type Housing | Shank Dia. Capacity | Weight | Length | Air Inlet |
12-40 Series – 1.7 hp (1.27 kW) |
||||||||
| 12L4018-01 | 18,000 | C | 1/4" | 4.2 lbs. 1.9 kgs. |
11.3" 287mm |
1/2" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Type Housing | Shank Dia. Capacity | Weight | Length | Air Inlet |
10-43 Series – 1.7 hp (1.27 kW) – Base Mount |
||||||||
| 10T4318-62 | 18,000 | A | 3/8" | 7.4 lbs. 3.4 kgs. |
7.1" 180mm |
1/2" | ||
| 10T4316-62 | 16,000 | A | 3/8" | 7.4 lbs. 3.4 kgs. |
7.1" 180mm |
1/2" | ||
| 10T4309-62 | 9,000 | A | 3/8" | 7.4 lbs. 3.4 kgs. |
7.1" 180mm |
1/2" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Type Housing | Shank Dia. Capacity | Weight | Length | Air Inlet |
11-43 Series – 1.7 hp (1.27 kW) – Mountable Motor Unit |
||||||||
| 11T4318-62 | 18,000 | A | 3/8" | 5.5 lbs. 2.5 kgs. |
7.1" 180mm |
1/2" | ||
Housing Guide: A=Aluminum, C=Composite, S=Steel
GENERAL:
Minimum Hose I.D.–
Minimum Hose I.D.–
- 12-10 Series: 1/4" (6.4mm)
- 12-20, 12-25 Series: 5/16" (7.9mm)
- 12-40,10-43, 11-43 Series: 1/2" (12.7mm)
STANDARD EQUIPMENT:
- Collet, applicable wrenches
