Dotco Cleco
Pistol Grip Drills
Dotco
330 29,000 RPM
0.4 0.9 hp (0.30 0.67 kW)
0.4 0.9 hp (0.30 0.67 kW)
- Non-reversible
- Ergonomically critical finger and thumb guides fit the hand to aid in control
- Excellent for aerospace, metal fab and woodworking
| Model Number | Free Speed rpm |
Drill Diameter Capacity | Weight | Length | Geared Chuck Size | Air Inlet Size | |
|---|---|---|---|---|---|---|---|
| With Chuck | Without Chuck | ||||||
14CF Series 0.4 hp (0.30 kW) Non-reversible |
|||||||
| 14CFS90-38 | 29,000 | 1/4" | 1.5 lbs. 0.68 kgs. |
5.7" 145mm |
3/8" | 1/4" | |
| 14CFS91-38 | 5,200 | 1/4" | 1.5 lbs. 0.68 kgs. |
5.7" 145mm |
3/8" | 1/4" | |
| 14CFS92-38 | 3,800 | 1/4" | 1.5 lbs. 0.68 kgs. |
5.7" 145mm |
3/8" | 1/4" | |
| 14CFS93-38 | 3,200 | 1/4" | 1.5 lbs. 0.68 kgs. |
5.7" 145mm |
3/8" | 1/4" | |
| 14CFS94-38 | 2,400 | 1/4" | 1.6 lbs. 0.72 kgs. |
5.7" 145mm |
3/8" | 1/4" | 14CFS95-38 | 1,000 | 1/4" | 1.8 lbs. 0.82 kgs. |
6.9" 175mm |
3/8" | 1/4" |
| 14CFS96-38 | 700 | 1/4" | 1.8 lbs. 0.82 kgs. |
6.9" 175mm |
3/8" | 1/4" | |
| 14CFS97-38 | 600 | 1/4" | 1.8 lbs. 0.82 kgs. |
6.9" 175mm |
3/8" | 1/4" | |
| With Chuck | Without Chuck | Free Speed | Drill Diameter Capacity | Weight | Length | Geared Chuck Size | Air Inlet |
14CS Series 0.6 hp (0.45 kW) Non-reversible |
|||||||
| 14CSL90-38 | 14CSL90-40 | 20,000 | 1/4" | 2.1 lbs. 0.95 kgs. |
6.3" 160mm |
1/4" | 1/4" |
| 14CSL98-38 | 14CSL98-40 | 6,000 | 1/4" | 2.1 lbs. 0.95 kgs. |
6.3" 160mm |
1/4" | 1/4" |
| 14CSL91-38 | 14CSL91-40 | 5,200 | 1/4" | 2.1 lbs. 0.95 kgs. |
6.3" 160mm |
1/4" | 1/4" |
| 14CSL92-38 | 14CSL92-40 | 3,200 | 1/4" | 2.1 lbs. 0.95 kgs. |
6.3" 160mm |
1/4" | 1/4" |
| 14CSL95-51 | 14CSL95-40 | 1,300 | 3/8" | 2.9 lbs. 1.31 kgs. |
8.1" 205mm |
3/8" | 1/4" |
| 14CSL97-51 | 14CSL97-40 | 500 | 3/8" | 2.9 lbs. 1.31 kgs. |
8.1" 205mm |
3/8" | 1/4" |
| With Chuck | Without Chuck | Free Speed | Drill Diameter Capacity | Weight | Length | Geared Chuck Size | Air Inlet |
14CN Series 0.9 hp (0.67 kW) Non-reversible |
|||||||
| 14CNL90-38 | 14CNL90-40 | 20,000 | 1/4" | 2.2 lbs. 1.00 kgs. |
6.8" 173mm |
1/4" | 1/4" |
| 14CNL98-38 | 14CNL98-40 | 6,000 | 1/4" | 2.2 lbs. 1.00 kgs. |
6.8" 173mm |
1/4" | 1/4" |
| 14CNL91-51 | 14CNL91-40 | 5,200 | 3/8" | 2.4 lbs. 1.08 kgs. |
7.2" 183mm |
3/8" | 1/4" |
| 14CNL92-51 | 14CNL92-40 | 3,200 | 3/8" | 2.4 lbs. 1.08 kgs. |
7.2" 183mm |
3/8" | 1/4" |
| 14CNL95-51 | 14CNL95-40 | 1,300 | 3/8" | 2.8 lbs. 1.27 kgs. |
8.6" 218mm |
3/8" | 1/4" |
| 14CNL97-53 | 14CNL97-40 | 500 | 1/2" | 3.5 lbs. 1.59 kgs. |
9.1" 231mm |
1/2" | 1/4" |
GENERAL:
Air Inlet: 1/4" NPT Use 5/16" (7.9mm) I.D. hose.
All Tools performance rated @ 90psi (620 kPa) air pressure.
Air Inlet: 1/4" NPT Use 5/16" (7.9mm) I.D. hose.
All Tools performance rated @ 90psi (620 kPa) air pressure.
STANDARD EQUIPMENT:
- 14CF: Jacobs geared chuck, chuck key
- 14CS, 14CN: Jacobs geared chuck, chuck key, dead handle (All models with a chuck opening greater than 1/2")
Pistol Grip Drills
Cleco
Speed Range: 160 1400 rpm
Nominal Motor Power: 1.0 HP / 0.75 kW
Nominal Motor Power: 1.0 HP / 0.75 kW
- Trigger Start
- Non-reversible
| Model Number | Free Speed rpm |
Stall Torque | Chuck Capacity | Length | Weight |
|---|---|---|---|---|---|
1.0 hp (0.67 kW) Non-reversible |
|||||
| 15DP-1.6B-53 | 160 | 160 ft.lb. 217 Nm |
1/2" 13mm |
9 3/4" 248mm |
6 lbs. 2.7 kgs. |
| 15DP-4B-53 | 400 | 44 ft.lb 60.0Nm |
1/2" 13mm |
8 1/2" 216mm |
5 1/2 lbs. 2.5 kgs. |
| 15DP-8B-53 | 800 | 22 ft.lb. 30.0 Nm |
1/2" 13mm |
8 1/2" 216mm |
5 1/2 lbs. 2.5 kgs. |
| 15DP-14B-49 | 1400 | 14 ft.lb. 19.0 Nm. |
3/8" 10mm |
8 1/4" 210mm |
4 1/2 lbs. 2.0 kgs. |
GENERAL:
- Air Inlet: 3/8" NPTF
- Minimum Hose Size: 3/8"
- Spindle Thread: 1/2"-20
- Spindle Offset: Pistol Grip: 31/32"
STANDARD EQUIPMENT:
- Operating instructions and service manual
- Dead handles on all models except 15DP-14B
- 3-Jaw Chuck and Key
CAPACITY CAUTION NOTE:
Pistol Grip 15 Series Drills must be equipped with support handle
(881580) when used with chucks larger than 3/8" capacity.
Theoretical stall torque based on gear reduction. These tools
are intended for slow speed applications and not high torque
applications. High maintenance should be expected if tools are
operated in their upper torque range.
CAUTION:
High reaction torque may be experienced with any drill at breakthrough.
Caution must be exercised when using any cutting tool
because of the possibility of the cutting tool bending or breaking.
Cutting tool maximum speed rating must equal or exceed speed of
tool. Eye protection must be worn while operating power tools.
Variable Speed Drills
Cleco
Speed Range: 600 2600 rpm
Nominal Motor Power: 0.7 HP / 0.5 kW
Nominal Motor Power: 0.7 HP / 0.5 kW
- Sand Cast Handle
- Hardened Steel Back Cap
- Governed Speed Control
- Variable Speed
- Calibrated Speed Control
- Non-reversible
| Model Number | Speeds rpm | Chuck Capacity | Length | Weight | |
|---|---|---|---|---|---|
| Free | Governed | ||||
0.7 hp (0.5 kW) Variable Speed |
|||||
| 135DPV-7B-43 | 600 | 150 - 550 | 3/8" 10mm |
9 5/8" 244mm |
3 5/8 lbs. 1.6 kgs. |
| 135DPV-7B-50 | 600 | 150 - 550 | 1/2" 13mm |
9 5/8" 244mm |
3 5/8 lbs. 1.6 kgs. |
| 135DPV-14B-50 | 1250 | 400 - 1200 | 1/2" 13mm |
9 1/4" 235mm |
3 3/8 lbs. 1.5 kgs. |
| 135DPV-14B-51 | 1250 | 400 - 1200 | 3/8" 10mm |
9 1/4" 235mm |
3 3/8 lbs. 1.5 kgs. |
| 135DPV-28B-51 | 2600 | 700 - 2400 | 3/8" 10mm |
8 1/2" 216mm |
3 1/8 lbs. 1.4 kgs. |
GENERAL:
- Air Inlet: 1/4" NPT
- Minimum Hose Size: 1/4" (6mm)
- Spindle Offset: 25/32" (20mm)
- Tool performance rated at 90 psi (620kPa) air pressure.
STANDARD EQUIPMENT:
- Operating instructions and service manual 3-Jaw Chuck and Key
CAPACITY CAUTION NOTE:
135DPV Drills must be equipped with support handle (861006) if
1/2" (13mm) capacity chuck is specified.
CAUTION:
High reaction torque may be experienced with any drill at
breakthrough. Caution must be exercised when using any cutting tool
because of the possibility of the cutting tool bending or breaking.
Cutting tool maximum speed rating must equal or exceed speed of
tool. Eye protection must be worn while operating power tools.
