Sander Accessories

Low Profile Backup Pads for Random Orbital Sanders
A thinner, harder pad generally recommended for aggressive sanding and leveling of flat surfaces.

Tapered Edge Backup Pads for Random Orbital Sanders
A thicker, softer pad generally recommended for contour sanding and feather edging.

Backup Pads for Orbital Sanders
PSA adhesion to tool eliminates the need for any tools when changing pads. Pad remains flat throughout full orbit at any speed.

Belt Sander Attachments
Dotco 12-12 and 12-13 series.

Sanding Belts – Aluminum Oxide, Resin Bond
For use with Dotco belt sanders. Minimum order: 10 of any one belt.

Sanding Belts – Non-woven
Minimum order: 10 of any one belt.

Spiralcool^TM Backing Pads
For Dotco sanders with 5/8"-11 threaded spindles. Pad contour develops draft action to cool disc and avoid excessive pick-up.

Save-A-Disc Pads
For Dotco sanders with 5/8"-11 threaded spindles. Ribs on the backing plate cause a flexing action which throws off accumulation.

PSA Disc Holders
Collet Chuck:
Chuck the PSA disc holder shank directly into the appropriate collet (1/8" or 1/4").
Threaded Spindle:
Remove the threaded shank from the PSA disc holder. Referring to the spindle adapter chart, select the correct spindle and thread it into the PSA holder.

For use with Dotco sanders with 5/8"-11threaded spindles.

For use with 14-2118 Sanding Nut Pad.

An adjustment scale allows a 9" maximum diameter sanding disc to be cut down to 3" or 4" diameter. The double bevel cutting edge assures a round cut without a loose edge or raveling.

For use with Dotco 12-12 series. To adapt right angle threaded spindle sanders for drilling, disc sanding with PSA holders, and light grinding.

For use with PSA Disc holders.

Return to Manufacturer Index