Dotco Cleco
Inline Extended Grinders
For Carbide Burrs, Mounted Points, Mounted Wheels
Dotco Cleco
18,000 – 28,000 RPM
0.3 – 1.2 hp (0.22 – 0.9 kW)
0.3 – 1.2 hp (0.22 – 0.9 kW)
- Extended housings
- Aluminum, composite or rugged steel housings
| Model Number | Free Speed rpm |
Abrasives Capacity | Type Housing |
Weight | Length | Collect Size |
Air Inlet Size | ||
|---|---|---|---|---|---|---|---|---|---|
| Front Exhaust | Side Exhaust | Rear Exhaust | |||||||
12-11 Series - 0.3 hp (0.22 kW) - 5" (127mm) Extension - 300 Series Collet |
|||||||||
| 12L1101-36 | 12L1181-36 | 28,000 | 1/2" Carbide Burr, 1" Mtd. Wheel | C | 1.3 lbs. 0.6 kgs. |
10.9" 277mm |
1/4" | 1/4" | |
| 12L1112-36 | 25,000 | 1/2" Carbide Burr, 1" Mtd. Wheel | C | 1.3 lbs. 0.6 kgs. |
10.9" 277mm |
1/4" | 1/4" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Abrasives Capactity | Housing | Weight | Length | Collet | Air Inlet |
10-11 Series - 0.3 hp (0.22 kW) - 5" (127mm) Extension - 300 Series Collet |
|||||||||
| 10L1101-36 | 10L1181-36 | 28,000 | 1/2" Carbide Burr, 1" Mtd. Wheel | A | 1.2 lbs. 0.5 kgs. |
9.8" 248mm |
1/4" | 1/4" | |
| 10L1112-36 | 25,000 | 1/2" Carbide Burr, 1" Mtd. Wheel | A | 1.2 lbs. 0.5 kgs. |
9.8" 248mm |
1/4" | 1/4" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Abrasives Capactity | Housing | Weight | Length | Collet | Air Inlet |
136 Series – 0.8 hp (0.6 kW) – 200 Series Collet |
|||||||||
| 136GEL-240-C4 | 24,000 | 1" Carbide Burr, 2" Mtd. Wheel | S | 3.5 lbs. 1.6 kgs. |
12.4" 315mm |
1/4" | 1/4" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Abrasives Capactity | Housing | Weight | Length | Collet | Air Inlet |
12-26 Series - 0.9 hp (0.67 kW) - 5" (127mm) Extension - 200 Series Collet |
|||||||||
| 12L2600-01 | 22,000 | 1" Carbide Burr, 11/2" Mtd. Wheel | C | 2.9 lbs. 1.3 kgs. |
12.9" 328mm |
1/4" | 1/4" | ||
| 12L2682-01 | 18,000 | 1" Carbide Burr, 11/2" Mtd. Wheel | C | 2.9 lbs. 1.3 kgs. |
12.9" 328mm |
1/4" | 1/4" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Abrasives Capactity | Housing | Weight | Length | Collet | Air Inlet |
12-26 Series – 0.9 hp (0.67 kW) – Multiple Extension - 300 Series Collet |
|||||||||
| 12S2674-2A | 18,000 | 3/4" Carbide Burr, 11/2" Mtd. Wheel | C | 4.2 lbs. 1.9 kgs. |
23.5" 597mm |
1/4" | 1/4" | ||
| Front Exhaust | Side Exhaust | Rear Exhaust | Free Speed | Abrasives Capactity | Housing | Weight | Length | Collet | Air Inlet |
15 Series – 1.2 hp (0.9 kW) – 200 Series Collet – Governed |
|||||||||
| 15GELC-180-C4 | 18,000 | 11/4" Carbide Burr, 2" Mtd. Wheel | S | 4.3 lbs. 2.0 kgs. |
14.5" 368mm |
1/4" | 3/8" | ||
Housing Guide: A=Aluminum, C=Composite, S=Steel
GENERAL:
All tools performance rated @ 90psi (620 kPa) air pressure.
Minimum Hose I.D.–
All tools performance rated @ 90psi (620 kPa) air pressure.
Minimum Hose I.D.–
- 10-11, 12-11 Series: 1/4" (4.8mm)
- 12-26, 136 Series: 5/16" (7.9mm)
- 15 (governed) Series: 3/8" (9.5mm)
STANDARD EQUIPMENT:
Applicable collet, collet wrenches
Applicable collet, collet wrenches
MULTIPLE EXTENSIONS FOR 12-26 SERIES:
Each extension changes the tool length and weight by: 12-26 series = 7.25" (184mm) and 1.2 lbs. (0.54 kg); The length and weight in the table are for 2A models
Each extension changes the tool length and weight by: 12-26 series = 7.25" (184mm) and 1.2 lbs. (0.54 kg); The length and weight in the table are for 2A models
- 1A = One extension
- 2A = Two extension
- 3A = Three extensions, etc.
All multiple extensions are not available in all speeds
